Confocal Microscopes
Leica TCS-SP8 - The Leica SP8 inverted confocal microscope is equipped with:
- Laser lines: Diode 405, Ar (458, 476, 488, 496, 514), DPSS 561, HeNe 594 and HeNe 633 nm;
- Objectives: 10x/ 0.40 dry, 20x/0.75 IMM/CORR, 40x/1.10 CORR water, 63x/1.40 oil and 63x/1.30 glycerol;
- 4 detectors: 2 Hybrid detector and 2 PMTs;
- Adapters for 35 mm in diameter plates, well plates and 25 mm in diameter coverslips;
- Tandem scanner (High-speed resonant plus conventional);
- Motorized XY stage;
- Environmental chamber with temperature and CO2 control;
- Allows: Lambda Scan; Mark & Find and Tile Scan (equipped with LasX "Navigator"); Timelapse; Dye Finder; FRAP; FRAP XT; FRET - AB (acceptor photobleaching); FRET - SE (stimulated emission); Live Data Mode; Photoconversion; Lightning; DIC;
Leica TCS-SP5 II - The Leica SP5 inverted confocal microscope is equipped with:
- Laser lines: Diode 405, Ar (458, 476, 488, 496), DPSS 561, and HeNe 633 nm;
- Objectives: 10x/ 0.40 dry, 20x/0.70 IMM/CORR, 40x/1.10 CORR water, 63x/1.40 oil and 63x/1.30 glycerol;
- 4 detectors: 1 Hybrid detector and 3 PMTs;
- Adapters for 35 mm in diameter plates, well plates and 25 mm in diameter coverslips;
- Tandem scanner (High-speed resonant plus conventional);
- Motorized XY stage;
- Environmental chamber with temperature and CO2 control;
- Allows: Lambda Scan; Mark & Find and Tile Scan; Timelapse; Dye Finder; FRAP; FRAP2; FRET - AB (acceptor photobleaching); FRET - SE (stimulated emission); Live Data Mode; Photoconversion; DIC;
Andor Revolution XD (Andor Technology) - Inverted Spinning disk confocal microscoped equipped with:
- Objectives: 10x/0.40 air, 20x/0.70 air, 40x/1.30 oil, 60x/1.42 oil, 100x/1.40 oil;
- Lasers: 488nm (50mW) and 561nm (50mW);
- Filters on the confocal system: Semrock dichroic dual mirror 488/561; 488 dichroic mirror; Semrock dual 488/561 emission filter; 488 emission filter;
- iXonEM+ DU-897 with 2x port coupler camera;
- X-Y Motorized stage;
- Fast Z stage;
- Allows: Motorized operation; Automatic multi-dimensional image acquisition; Environmental chamber with temperature and CO2 control (big incubator - allows multi-well plates, slide chambers and 35mm dishes), DIC;
Widefield Microscopes
Zeiss Axio Imager Z1 - Upright widefield microscope equipped with:
- Fluorescence filters for: 365, 436, 470, 500, 550, and 640 nm;
- Objectives: 5x air, 10x/0.30 Ph1 air, 20x/0.50 Ph2 air, 40x/1.30 Ph3 oil, 63x/1.40 oil DIC, and 100x/1.40 oil DIC;
- Allows: Motorized operation; Phase contrast (10-40x) and DIC (63-100x); Automatic acquisition of multi-channel images and Z planes;
Zeiss Axio Imager Z1 Apotome - Upright widefield microscope equipped with:
- Fluorescence filters for: 365, 450, 470, 550, and 572 nm;
- Objectives: 10x/0.30 air, 20x/0.8 air, 40x/1.30 oil, 63x/1.40 oil DIC, and 100x/1.40 oil DIC;
- Allows: Motorized operation; Optical sectioning with Apotome; Automatic acquisition of multi-channel images and Z planes;
Zeiss Axiovert 200M - Inverted widefield microscope equipped with:
- Fluorescence filters for: 387, 472, 562, and 628 nm;
- Objectives: 20x/0.3 Ph1 air, 40x/1.40 oil DIC, 40x/1.30 Ph3 oil, 63x/1.40 oil DIC;
- CoolSnap HQ (Roper) camera;
- X-Y Motorized stage;
- NanoPiezzo Z stage;
- Anti-vibration passive table;
- Allows: Motorized operation; Automatic multi-dimensional image aquisition; Environmental chamber with temperature and CO2 control;
Leica DMI6000 - Inverted widefield microscope equipped with:
- Objectives: 10x/0.30 Ph1 air, 20x/0.40 CORR Ph1 air, 40x/0.60 CORR Ph2, 63x/1.30 glycerol;
- Fluorescence filters for: 340, 460, 540, and 590 nm & CFP/YFP/GFP/MRFP External filter sets;
- Hamamatsu FLASH4.0 camera;
- X-Y Motorized stage;
- Allows: Motorized operation; Automatic multi-dimensional image acquisition; Environmental chamber with temperature and CO2 and O2 (hypoxia) control (small incubator - allows ibidi slide chambers and 35mm dishes);
Leica DMI6000 - Inverted widefield microscope equipped with:
- Objectives: 10x/0.30 Ph1 air, 20x/0.40 CORR Ph1 air, and 40x/0.60 CORR Ph2;
- Fluorescence filters for: 340, 460, 540, and ;
- Hamamatsu FLASH4.0 camera;
- X-Y Motorized stage;
- Allows: Motorized operation; Automatic multi-dimensional image acquisition; Environmental chamber with temperature and CO2 control (big incubator - allows multi-well plates, slide chambers and 35mm dishes);
Others
Nikon Ti TIRF - Inverted motorized microscope equipped with:
- Objectives: 10x/0.45 WD 4mm, 40x/0.95 WD 0.24mm, 60x/1.4 oil WD 0.13mm, and 100x/1.47 oil WD 0.12mm;
- Multiple combinations with Lumencor SpectraX light engine and external emission filter wheel;
- Andor iXon888;
- Allows: Full Motorized operation; Automatic acquisition of multi-channel images, Z planes, and positions; Environmental chamber with temperature and CO2 control (big incubator - allows multi-well plates, slide chambers and 35mm dishes); DIC; TIRF. Possibility to implement super-resolution applications.
Workstations
Descartes – Image processing and analysis workstation equipped with:
- OS: Ubuntu 16.04 LTS, 64bits
- CPU: Intel Core i7 3930K, 3.20GHz
- Ram: 31.4Gb
- Graphics: GeForce GT 430/PCle/SSE2
- HDD space1: 1x 1Tb
- HDD space2: 1x 1Tb
- Software: Huygens Essential, Fiji (ImageJ)
Euler – Image processing and analysis workstation equipped with:
- OS: Microsoft Windows 10 Home, 64bits
- CPU: Intel Xeon E5 1630 V3, 3.7GHz
- Ram: 128Gb
- Graphics: NVIDIA Quadro M-4000
- HDD space: 1x 6 Tb
- Software: Imaris, MatLab R2018, Fiji (ImageJ)
Gauss– Image processing and analysis workstation equipped with:
- OS: Microsoft Windows 7 Professional, 64bits
- CPU: Intel Xeon CPU E5-1620 V2, 3.70GHz
- Ram: 8Gb
- Graphics: NVIDIA Quadro K600
- HDD space: 1x 2Tb
- Software: Las X, Fiji (ImageJ)
Huygens– Image processing and analysis workstation equipped with:
- OS: Microsoft Windows 10 Enterprise, 64bits
- CPU: Intel Xeon CPU E5-2650 V2, 2.60GHz
- Ram: 192Gb
- Graphics: NVIDIA Quadro K4000
- HDD space: 1x 2Tb
- Software: Huygens Professional, IVIS, Las X, GraphPad Prism, Fiji (ImageJ)